Page 1 of 1
HH Strat wiring mod
Posted: Wed Jun 20, 2012 9:54 pm
by Leon Van Bommel
Refer to the picture. Anyone see any reasons this may not work?
Re: HH Strat wiring mod
Posted: Sun Jun 24, 2012 12:04 am
by Greg Robinson
Sorry, I'd missed this, but that looks fine Leon.
Re: HH Strat wiring mod
Posted: Sun Dec 23, 2012 12:32 pm
by Leon Van Bommel
So I finally wired the strat with this mod. It seems to work but when I go through the switches and tap pole pieces some coils are making clicks when they should be off. For example the neck pick up is always on. However it does change volume of the clicks with movement of the 4 way. I looked for switch terminals shortong out. Do I have a bad switch? Or maybe a grounding problem? I have a multimeter, what should I do to test it?
Re: HH Strat wiring mod
Posted: Mon Dec 24, 2012 2:10 pm
by Leon Van Bommel
Just an update. Turns out the pickguard was stopping the switch from making contact in one of the last positions. I think the volume thing was due to switching between series and paralell.