MIMF

Does anyone one know what the height of the bridge in on a convertible is. I know they are adjustable, but I'm looking for the thickness and any other dimensions you might have. Also neck angle if anyone knows. Thanks.

I don't own a convertable anymore but the neck on the one I had was adjustable with an allen screw like the three bolt Fender necks from the 70's. The neck angles of my other Danos are between 1.5 and 2 degrees but some of them are shimmed. If memory serves me, the bridge was about .25" thick, .5" wide, and 3.5" long. It had a piece of fret wire in the middle and sat on three set screws to adjust the height and angle with the middle one in front of the fret wire and the other two behind it (but it might have been on backwards). Hope this helps.

Thanks David. That does help.