Hi everyone, new MIMF member here! So... I build a home made guitar and 'm have a very hard time finding 2" Gold Neck Mount Screws! Did the Google search and nothin'! All the usual guitar parts biggies do not carry them. Am I the only guy with a thicker than normal guitar body having this problem locating these screws? Do they even exist? Any help given will greatly be appreciated. Best wishes,
Guy Marshall
2" Gold Neck Mount Screws
- Bryan Bear
- Posts: 1382
- Joined: Fri Jan 06, 2012 1:05 pm
- Location: St. Louis, MO
Re: 2" Gold Neck Mount Screws
Is this what you are looking for but in gold?
https://www.woodcraft.com/products/high ... 3d6e0001e2
Also, I'm pretty sure these are available in a brass coated finish at places like Home Depot. If you can't find 2 inch, you can get them longer and cut the ends off.
https://www.woodcraft.com/products/high ... 3d6e0001e2
Also, I'm pretty sure these are available in a brass coated finish at places like Home Depot. If you can't find 2 inch, you can get them longer and cut the ends off.
PMoMC
Take care of your feet and your feet will take care of you.
Take care of your feet and your feet will take care of you.
- Steve Sawyer
- Posts: 965
- Joined: Wed Jan 02, 2013 2:20 pm
- Location: Detroit, Michigan
Re: 2" Gold Neck Mount Screws
Spax screws come in a gold-colored plating. Not exactly what we see on guitar hardware but might be close enough, and they come in lengths up to 2" in quarter-inch increments.
==Steve==
-
- Posts: 3
- Joined: Sun Mar 31, 2019 1:32 pm
Re: 2" Gold Neck Mount Screws
Thanks guys, I'll look into it!
- Barry Daniels
- Posts: 3223
- Joined: Thu Jan 05, 2012 10:58 am
- Location: The Woodlands, Texas
Re: 2" Gold Neck Mount Screws
MIMF Staff
- Bryan Bear
- Posts: 1382
- Joined: Fri Jan 06, 2012 1:05 pm
- Location: St. Louis, MO
Re: 2" Gold Neck Mount Screws
Wait are we talking about a bolt on electric neck or bolt on acoustic?
PMoMC
Take care of your feet and your feet will take care of you.
Take care of your feet and your feet will take care of you.