Page 1 of 1
mini 5pin connectors for swapping pickups
Posted: Mon Jan 16, 2017 5:33 pm
by Greg Martin
Im going to wind some pickups as soon as it warms up,and would like to find some mini 3 or 5 pin connectors that would allow me to swap out test pickups with out repeated soldering during testing.i had though about deans connectors but maybe there are others??
Re: mini 5pin connectors for swapping pickups
Posted: Tue Jan 17, 2017 1:14 am
by David King
EMG uses AMP connectors and those are widely available from places like Mouser and Digikey. I think you want the .1" pitch if you want to match up to the EMG's wiring harnesses. Other companies make more or less compatible connectors.
Re: mini 5pin connectors for swapping pickups
Posted: Tue Jan 17, 2017 8:05 pm
by Dan Smith
David King wrote:EMG uses AMP connectors and those are widely available from places like Mouser and Digikey. I think you want the .1" pitch if you want to match up to the EMG's wiring harnesses. Other companies make more or less compatible connectors.
Molex are good too.