Tenor Uke nut width

Ukulele discussions
Post Reply
Alan Carruth
Posts: 1288
Joined: Sun Jan 15, 2012 1:11 pm

Tenor Uke nut width

Post by Alan Carruth »

...so I'm working on a tenor for a give-away at a raffle, and I can't find the drawing! I have the drawing for a soprano, and just can't remember whether the fingerboard on the tenor should be wider. Any help that's not too contradictory would be appreciated....
Top
Gary Gill
Posts: 15
Joined: Fri Feb 22, 2013 7:29 am

Re: Tenor Uke nut width

Post by Gary Gill »

I build my tenors 1-3/8" at the nut.
Top
Michael James
Posts: 23
Joined: Fri Jun 12, 2015 12:54 am

Re: Tenor Uke nut width

Post by Michael James »

I have a commercial one here, and its 35mm @ nut and 43mm @12th fret...
Top
Rob Collins
Posts: 10
Joined: Sat Jan 07, 2012 5:36 pm

Re: Tenor Uke nut width

Post by Rob Collins »

Yes - 35mm at the nut is pretty standard. My uke necks are 45mm at the body join for all body sizes and 12.5mm string spacing at the bridge.
Top
User avatar
Michael A Shelley
Posts: 10
Joined: Sat Jan 07, 2012 8:20 pm
Location: Texas
Contact:
Contact Michael A Shelley

Re: Tenor Uke nut width

Post by Michael A Shelley »

The Hana Lima 'Ia plan has 1-3/8" at the nut and 1-3/4" where it meets the body. I recently built a tenor with these specs and it feels right; an earlier one with a 1-1/2" nut seemed too wide to me. A tenor Fluke is 1-7/16" and 1-11/16".
Top
Post Reply

Return to “Ukuleles”