Mutes on Old Gretsch Chet Models
Posted: Fri Feb 10, 2012 2:52 pm
Don't know if any of you have had the need to replace the mute cushions on early Gretsch 'Chet Atkins' model guitars. Mutes on my '65 Gent were in pretty rough shape; the old stuff got dry & crumbly, while the adhesive holding it to the 'elevator' cleat turned gummy and nasty.
I've found the same rubber material that is used to make mouse pads works pretty well. Get a $2 pad from the local computer store, cut it to the same contour as the cleat using a hot wire cutter, glue it down with some Duco and you're good.
The thick felt used in piano hammers works OK too, but you'll need to 'pick' it a lot to soften it up. If you can still find large felt ukulele picks you can trim down, those would work OK too, but the rubber still has the most "give" and works best.
I've found the same rubber material that is used to make mouse pads works pretty well. Get a $2 pad from the local computer store, cut it to the same contour as the cleat using a hot wire cutter, glue it down with some Duco and you're good.
The thick felt used in piano hammers works OK too, but you'll need to 'pick' it a lot to soften it up. If you can still find large felt ukulele picks you can trim down, those would work OK too, but the rubber still has the most "give" and works best.