Five Years In The Making...

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
User avatar
Tom Owen
Posts: 60
Joined: Fri Jan 06, 2012 2:56 pm
Location: Kauai, Hawaii USA

Five Years In The Making...

Post by Tom Owen »

I haven't posted for a long time. I took a commission for a harp guitar 5 years ago, and life got in the way. I was working at the music shop 40 hours a week and doing more repairs than I really wanted, but Kauai is a small island and if I didn't do it, it had to go off island, most time to the mainland. So a bit of pressure. Then the owner of the shop decided to close and move to the mainland. I retired. So finally I could work on what I wanted too. I still take a few repairs if I feel like it, but the main thing is the harp guitar.
So it is based on the fatboy (thanks Mark), I know it is still in progress, but it is to the finishing stage so I hope it is OK to post a pic. Here it is... :D
Attachments
harp 10.jpg
User avatar
Bryan Bear
Posts: 1382
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: Five Years In The Making...

Post by Bryan Bear »

Nice! Let's see some more pics.
PMoMC

Take care of your feet and your feet will take care of you.
User avatar
Tom Owen
Posts: 60
Joined: Fri Jan 06, 2012 2:56 pm
Location: Kauai, Hawaii USA

Re: Five Years In The Making...

Post by Tom Owen »

OK some more pics... Top is bearclaw Alaska sitka back and sides are curly claro walnut
Attachments
20201005_171349.jpg
20201005_171428.jpg
20200908_172027.jpg
20200826_133706.jpg
20200826_133600.jpg
User avatar
Bryan Bear
Posts: 1382
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: Five Years In The Making...

Post by Bryan Bear »

I cant wait to see it all strung up and playing. Make sure you remember this thread.
PMoMC

Take care of your feet and your feet will take care of you.
Clay Schaeffer
Posts: 1674
Joined: Fri Jan 06, 2012 12:04 pm

Re: Five Years In The Making...

Post by Clay Schaeffer »

Very Nice!
The "fat boy" looks like a good choice for a harp guitar conversion.
I haven't seen any Posts by Mark Swanson in quite a while. Is he still building guitars?
User avatar
Jim McConkey
Posts: 1081
Joined: Thu Jan 05, 2012 4:00 pm
Location: Way north of Baltimore, MD

Re: Five Years In The Making...

Post by Jim McConkey »

Mark is still building and pops in occasionally, but not very often right now.
MIMForum Staff - Way North of Baltimore
Matthew Lau
Posts: 609
Joined: Sat Feb 18, 2012 2:03 am

Re: Five Years In The Making...

Post by Matthew Lau »

That is beautiful!

On a side note, hope Mark is doing well.
Post Reply

Return to “Flat-Top Acoustic Guitars and Bass Guitars”