Are these usable for finishing?

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.
Post Reply
Mike Kinny
Posts: 8
Joined: Fri May 24, 2019 12:49 pm

Are these usable for finishing?

Post by Mike Kinny »

Hi,

Are any of these products good for lacquer/shellac finishing a classical guitar? I want the back/sides look as if there's a layer of glass on them. :)

https://www.bosch-do-it.com/za/en/diy/t ... 199926.jsp

Thanks, Abraham
User avatar
Barry Daniels
Posts: 3242
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: Are these usable for finishing?

Post by Barry Daniels »

I don't have any personal experience, but I would say no. If you want to save some bucks get a Harbor Freight spray gun. They actually are fairly good quality.
MIMF Staff
Post Reply

Return to “Glues and Finishes”