Chapman Stick
-
- Posts: 6
- Joined: Sun Jun 17, 2018 2:26 pm
Chapman Stick
Hi,
I new here and I am searching for the Chapman Fingerboard Stick Scale Fret separation in order to built one! I will be forever grateful to someone could provide it please.
Thanks in advance!
Opacheco.
I new here and I am searching for the Chapman Fingerboard Stick Scale Fret separation in order to built one! I will be forever grateful to someone could provide it please.
Thanks in advance!
Opacheco.
- Eric Knapp
- Posts: 647
- Joined: Mon May 02, 2016 2:01 pm
- Location: Wisconsin, USA
- Contact:
Re: Chapman Stick
There are Chapman Stick with different scale lengths. They are all published on the Stick website. Is that what you mean?
-Eric
-Eric
-
- Posts: 6
- Joined: Sun Jun 17, 2018 2:26 pm
Re: Chapman Stick
Eric thanks for your response by I talking about the separation scale of the fret in order to do a 36 inch Chapmen Stick fretboard!Oscar Pacheco wrote:Hi,
I new here and I am searching for the Chapman Fingerboard Stick Scale Fret separation in order to built one! I will be forever grateful to someone could provide it please.
Thanks in advance!
Opacheco.
Thanks again for your time!
Opacheco
- Steve Sawyer
- Posts: 965
- Joined: Wed Jan 02, 2013 2:20 pm
- Location: Detroit, Michigan
Re: Chapman Stick
Are you looking for the fret spacing for a particular scale length? And...is the 36" figure you mention the scale length you're shooting for?Oscar Pacheco wrote:I talking about the separation scale of the fret in order to do a 36 inch Chapmen Stick fretboard!
==Steve==
-
- Posts: 370
- Joined: Fri Jan 06, 2012 5:37 pm
- Location: Red Bluff California
Re: Chapman Stick
Oscar, if you are seeking fret positions for a 36" (or any other) scale length, you will find fret calculators in the MIMF library under "Programs, Spreadsheets and other programs". There are other programs available on the internet that will calculate the fret locations for whatever scale length you choose.
-
- Posts: 6
- Joined: Sun Jun 17, 2018 2:26 pm
Re: Chapman Stick
Thanks Bill, I will check them there!Bill Raymond wrote:Oscar, if you are seeking fret positions for a 36" (or any other) scale length, you will find fret calculators in the MIMF library under "Programs, Spreadsheets and other programs". There are other programs available on the internet that will calculate the fret locations for whatever scale length you choose.
Opacheco.
-
- Posts: 2690
- Joined: Sat Jan 07, 2012 10:01 pm
- Location: Portland, OR
- Contact:
Re: Chapman Stick
I always recommend the Fretfind d2 app online as it will create a printable PDF that you can print on a single sheet (Kinkos has an inexpensive B&W 12 x 48" printer) and then stick that onto your neck to see exactly where to saw your fret lines.
-
- Posts: 6
- Joined: Sun Jun 17, 2018 2:26 pm
Re: Chapman Stick
David thanks for your comments. Please send me a link for!David King wrote:I always recommend the Fretfind d2 app online as it will create a printable PDF that you can print on a single sheet (Kinkos has an inexpensive B&W 12 x 48" printer) and then stick that onto your neck to see exactly where to saw your fret lines.
Opacheco.
- Peter Wilcox
- Posts: 1322
- Joined: Sun Jan 08, 2012 1:31 am
- Location: Northeastern California
Re: Chapman Stick
Maybe I can't fix it, but I can fix it so no one can fix it