Glues that dry clear

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.
Post Reply
User avatar
Steve Sawyer
Posts: 965
Joined: Wed Jan 02, 2013 2:20 pm
Location: Detroit, Michigan

Re: Glues that dry clear

Post by Steve Sawyer »

Bryan Bear wrote:Frank Ford had a piece his site showing that he warms his refrigerated HHG in the microwave (or so I remembered). I tried it ONCE. My glue was not in there very long at all and I had a mess of burnt foamy glue. I went back and looked, Frank heats water in the microwave and adds the refrigerated clue cup to it.
Yeah - I would try it with stuff that I take out of the freezer, but even then will probably start out with maybe 10 seconds, just enough to un-freeze it so it won't take so long to bring it up to temperature. Small quantities of anything get smokin' hot real fast in a microwave! DAMHIKT.
==Steve==
Top
Post Reply

Return to “Glues and Finishes”