Pearl Inlay stuff

Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.
Post Reply
Greg Steil
Posts: 158
Joined: Sat Jan 07, 2012 7:54 pm

Pearl Inlay stuff

Post by Greg Steil »

Where is the best/cheapest source of Pearl dots(specifically) and other pearl/abalone stuff? I am aware of DePaule, and Duke of Pearl. Thanks
Alan Carruth
Posts: 1288
Joined: Sun Jan 15, 2012 1:11 pm

Re: Pearl Inlay stuff

Post by Alan Carruth »

Rescue Pearl is good.
Jamie Unden
Posts: 144
Joined: Mon Feb 20, 2012 5:25 pm

Re: Pearl Inlay stuff

Post by Jamie Unden »

Check EBay - I've had good luck there.
David King
Posts: 2690
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR
Contact:

Re: Pearl Inlay stuff

Post by David King »

I like Rescue Pearl as well although sometimes the dots are .060 and sometimes they are .050. Just be sure to mark each bag as such if it's important to you.
Greg Steil
Posts: 158
Joined: Sat Jan 07, 2012 7:54 pm

Re: Pearl Inlay stuff

Post by Greg Steil »

Thanks for the help folks!
User avatar
Dan Smith
Posts: 346
Joined: Mon May 18, 2015 9:33 pm
Location: Texas

Re: Pearl Inlay stuff

Post by Dan Smith »

Be wary of Abalone dots from China.
The ones I received were a thin layer of Abalone glued to shell.
The Abalone was easy to sand away, leaving only pearl visible.
Ever-body was kung fu fight-in,
Them kids was fast as light-nin.
Steve Koons
Posts: 11
Joined: Wed Jun 04, 2014 12:26 pm

Re: Pearl Inlay stuff

Post by Steve Koons »

I bought 20 paua abalone dots (1/4-inch) from Rescue Pearl a couple weeks ago.... I was very surprised to see that they were real deep blues and greens on one side, but the back side was equally as nice, and were light pink with shades of green.... So I could actually use either side, which I thought was really unusual. Shame I don't have the guts to drill out the existing dots and replace them <grin>.
User avatar
Barry Daniels
Posts: 3223
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: Pearl Inlay stuff

Post by Barry Daniels »

That is pretty standard for real shell. Usually the green side is used but I sometimes use the lighter side as it is more reflective.
MIMF Staff
Post Reply

Return to “Wood and Materials Q&A”