Dave Anderson - Omjc

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
User avatar
Dave Anderson
Posts: 48
Joined: Fri Jan 06, 2012 1:28 pm

Dave Anderson - Omjc

Post by Dave Anderson »

I finished this one yesterday (5-30-2013) guys...strung it up,set it up and played for a few hours.I'm pretty happy with the
tone. It's an OM jumbo with cutaway- It's the 1st one I've built like this and I like the shape .. I might just make
another one like this for myself someday! :D

Koa - back and sides,headstock
Carpathian spruce top/red spruce braces,maple bridge pad
Solid mahogany neck w/ carbon fiber
Brw - fingerboard,bridge,bindings
EVO gold frets
K & K pickup
02202 (150 x 112).jpg
02202 (150 x 112).jpg (6.26 KiB) Viewed 9757 times
03305 (112 x 150).jpg
03305 (112 x 150).jpg (6.24 KiB) Viewed 9757 times
04416 (112 x 150).jpg
04416 (112 x 150).jpg (6.41 KiB) Viewed 9757 times
05503 (150 x 112).jpg
05503 (150 x 112).jpg (7.58 KiB) Viewed 9757 times
06606 (112 x 150).jpg
06606 (112 x 150).jpg (6.83 KiB) Viewed 9757 times
Sorry about the tiny pics .
Bob Menzel
Posts: 75
Joined: Sun Jan 08, 2012 3:40 pm
Location: LINY

Re: Dave Anderson - Omjc

Post by Bob Menzel »

That's one pretty nice looking guitar. Only carbon fiber in the neck, no rod? If so, what dimensions CF, and if you've done this previously, how have those instrument's necks held up?
Not Your Uncle
User avatar
Dave Anderson
Posts: 48
Joined: Fri Jan 06, 2012 1:28 pm

Re: Dave Anderson - Omjc

Post by Dave Anderson »

Bob Menzel wrote:That's one pretty nice looking guitar. Only carbon fiber in the neck, no rod? If so, what dimensions CF, and if you've done this previously, how have those instrument's necks held up?
Thanks,
No,It has a 2 way truss rod Bob. I usually make a five piece neck but this customer wanted a one piece mahogany neck.
Jim Bonnell
Posts: 232
Joined: Thu Feb 02, 2012 7:32 pm
Location: Tampa Bay area Fl.

Re: Dave Anderson - Omjc

Post by Jim Bonnell »

That came out great looking Dave. Too bad the pictures aren't bigger. Glad you got it done. Now you can move on to the Tele. <G>
User avatar
Dave Anderson
Posts: 48
Joined: Fri Jan 06, 2012 1:28 pm

Re: Dave Anderson - Omjc

Post by Dave Anderson »

OK,I fixed the pictures. This is much better...
00112 (400 x 299).jpg
00112 (400 x 299).jpg (30.72 KiB) Viewed 9700 times
002225 (299 x 400).jpg
002225 (299 x 400).jpg (35.05 KiB) Viewed 9700 times
003333 (400 x 299).jpg
003333 (400 x 299).jpg (36.8 KiB) Viewed 9700 times
004444 (400 x 299).jpg
004444 (400 x 299).jpg (34.72 KiB) Viewed 9700 times
Jim Bonnell
Posts: 232
Joined: Thu Feb 02, 2012 7:32 pm
Location: Tampa Bay area Fl.

Re: Dave Anderson - Omjc

Post by Jim Bonnell »

Now you can see that nice looking Koa.
User avatar
Mark Swanson
Posts: 1991
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: Dave Anderson - Omjc

Post by Mark Swanson »

That's better! Looks like a great guitar Dave!
  • Mark Swanson, guitarist, MIMForum Staff
Jason Rodgers
Posts: 1554
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: Dave Anderson - Omjc

Post by Jason Rodgers »

Jim Bonnell wrote:Now you can see that nice looking Koa.
Yes, indeed! That thing is nice all over. The pickguard fits well in the scheme. Warm, golden colors throughout. Good one!
-Ruining perfectly good wood, one day at a time.
User avatar
Dave Anderson
Posts: 48
Joined: Fri Jan 06, 2012 1:28 pm

Re: Dave Anderson - Omjc

Post by Dave Anderson »

Thanks guys. Jim, Yeah,it's back to the Tele now..
Chuck Tweedy
Posts: 1182
Joined: Fri Jan 06, 2012 6:25 pm
Location: San Diego, CA

Re: Dave Anderson - Omjc

Post by Chuck Tweedy »

Awesome job Dave!!
Likes to drink Rosewood Juice
User avatar
Ryan Mazzocco
Posts: 605
Joined: Sat Feb 04, 2012 6:01 pm
Location: Joplin, MO
Contact:

Re: Dave Anderson - Omjc

Post by Ryan Mazzocco »

very pretty guitar. Great job!
everett stone
Posts: 6
Joined: Mon Jan 09, 2012 2:42 pm

Re: Dave Anderson - Omjc

Post by everett stone »

what kind of wood is that on the headstock? I assum it is also in the rosette? It is one beautiful guitar!!!
everett stone
Posts: 6
Joined: Mon Jan 09, 2012 2:42 pm

Re: Dave Anderson - Omjc

Post by everett stone »

sorry, I see that is KOA. Again, one beautiful guitar.
User avatar
Dave Anderson
Posts: 48
Joined: Fri Jan 06, 2012 1:28 pm

Re: Dave Anderson - Omjc

Post by Dave Anderson »

Here's a good picture of the shape...
005665 (299 x 400).jpg
005665 (299 x 400).jpg (22.73 KiB) Viewed 9449 times
Chris Paulick
Posts: 58
Joined: Sat Jan 07, 2012 7:20 pm

Re: Dave Anderson - Omjc

Post by Chris Paulick »

Nice!!!
Post Reply

Return to “Flat-Top Acoustic Guitars and Bass Guitars”