MIMF

I should have mentioned that there are two bolts in the neck block. The second one is higher up (near the fingerboard) and you can't really see it. Uses the same hex tool but is hard to loosen only because you have to feel around with the hex tool. If you want to take the neck completely off, the fi...

There is a darkish piece of wood on top of the neck block that has the name Walden printed on it. It's actually super thin and you can push into it with a screwdriver. Search around the cente4r until your screwdriver (or whatever) sinks in, then work the stuff away and you'll find the bolt head insi...

This should be easy as the necks in Walden's are bolt-ons. So I pulled the bolt from the neck block and loosened the fret board above the body, then watched the neck fall off. But.. .it didn't ! That neck is still very tight on the body. I've scored the finish around the joint so that's not it, and ...

It's basically a good guitar and sadly I'm poor and can't afford anything else. I do have past experience in instrument repair (mostly violin making) and am not afraid of such work. The problem is that the fingerboard has little radius (almost flat as a classical) and the frets are tiny (like strand...